Boveda Aluminum Holders for Single 60g Pouch for Humidors
It's fine to use Size 60 Boveda in your humidor without a Boveda Holder, but it sure does make for a handsome presentation. Although Boveda is safe to touch cigars, you might prefer to move the packets up and out of the way, so you can immediately see your sticks when you open your humidor.
You can install a Boveda Holder inside your humidor using either the hook and loop or the magnet kit. Both mounting kits arrive with the holder.Â
It's fine to use Size 60 Boveda in your humidor without a Boveda Holder, but it sure does make for a handsome presentation.Â
How To Use:
Sttep 1, Prep the humidor surface:
- Use a dry cloth to wipe down the underside of the humidor lid.
- Choose either the enclosed metal or magnetic sheet to affix to the humidor, then peel off the paper backing to expose the adhesive. (If you're using the enclosed hook and loop kit, affix the soft-sided strips to the humidor.)
- With the sticky side up, apply the sheet to the humidor. Apply simultaneous pressure for 60 seconds to the sheet and the reverse side of the lid. (If you hear any cracking, back off on the pressure.)
Â
Step 2, Prep the Aluminum holder:- Use a dry cloth to wipe down the holder.
- Place the holder on a hard surface.
- Peel off the paper backing on the remaining sheet.
- Place the sticky side on the back of the holder and apply soft pressure for 60 seconds. (Again, if you hear any cracking, don't use as much muscle.)
Â
Step 3, Wait a day:- Allow the adhesive to set for 24 hours.
- After 24 hours, insert Boveda Size 60 into the holder.
- Attach the back of the holder inside your humidor's lid.
Â
Product Dimensions:
- Aluminum for One Boveda (Size 60):Â 5.5"/13.97 cm x 3.75"/9.525 cm x 0.5"/1.27 cm
