Boveda Mouting Plate for 320g Boveda Cardboard Box
Although Boveda is safe to touch cigars, you might prefer to move the packets up and out of the way, so you can immediately see your sticks when you open your humidor.
It's fine to use Size 320 Boveda in your humidor without a Boveda Holder, but it sure does make for a handsome presentation. (The Size 320 Boveda is sold separately.)
How To Use:
Step 1, Investigate your humidor:
- Determine if your humidor has a magnet hidden underneath the wood veneer. To do so, hold the mounting plate up to the inside of the lid to see if it's attracted to a hidden magnet. If so, proceed to Step 3.
Step 2, Prep the humidor:
- Use a dry cloth to wipe down the underside of the humidor lid and mounting plate.
- Peel off the paper backing from the magnetic sheet to expose the adhesive.
- If your humidor has an existing metal plate mounted to the lid, apply the sticky side of the magnet to the mounting plate.
- If your humidor lacks a metal plate, adhere the magnet sheet directly to the humidor lid. - Apply simultaneous pressure for 60 seconds to the magnet and the reverse side of the lid or plate. (If you hear any cracking from the wood, back off on the pressure.)
- Allow adhesive to set for 24 hours before attaching the Boveda.
Step 3, Grab the size 320, it's installation time:
- Find the arrow at the bottom of the Size 320 pack and align it with the notch on the mounting plate.
- Using the arrows and the notch as a guide, insert the tabs that are on the mounting plate into the square slots on the back of the packet.
- Now attach the back of the plate to humidor's lid.
Product Diemnsions:
6.375"/16.1925 cm x 4.625"/11.7475 cm
